-
From the ARM Archive: Causes and Cures of Problems During Rotomoulding
We’re sharing this article on the rotomolding cycle by Professor Roy Crawford, initially published in 1994. Although 30 years old, its content remains relevant to today’s manufacturing challenges. His detailed technical analysis of the rotomolding cycle, exploring how temperature variations, crystallinity, and cooling rates affect product quality, continues to serve as valuable reference material for…
-
Ask Dr. Nick: Incorporating Recycle in Rotomolded Parts
Could you comment on the potential for using recycled PE in rotomolded water tanks? Dr. Nick: The incorporation of recycled PE into tank materials is a relatively new concept and is not covered by any of the normal standards (eg ASTM D1998). Some general comments on the subject are given below: Hopefully you find the…
-
What ARM Did in Q3 2024
ARM provides an extraordinary return on investment for our members. Here’s a summary of what we did in the third quarter of 2024. You can also listen to a conversation about ARM’s third quarter which was generated by AI. Here’s what we did in Q2. Not a member? Join today.
-
Rotoplas 2024: A Triumph of Innovation and Collaboration in Rotomolding
The rotational molding industry came together in force for Rotoplas 2024, ARM’s flagship event, showcasing the strength and vibrancy of our industry. With 80 exhibitors and just shy of 1,000 attendees from 36 countries, the conference buzzed with energy, ideas, and opportunities for growth. Alvin Spence, ARM President, Centro Inc. summed up the event’s success:…
-
ARM 2024 Awards
The Association of Rotational Molders presented the following awards on September 26 at the Annual Meeting: Full photo gallery.
-
Announcing a New Webinar Series on Wall Thickness Control in Rotomolding
The Association of Rotational Molders is excited to introduce a new series of four webinars led by ARM Technical Director Dr. Nick Henwood, an industry expert with over 30 years of experience in rotomolding. This series will provide an in-depth exploration of wall thickness control, a critical aspect of the rotomolding process. Starting in October,…
-
Testimonials: ARM Training Academy’s Impact on Rotomolders
The ARM Training Academy has been a valuable resource for members of the Association of Rotational Molders for over two years. Designed to enhance skills and safety in the rotational molding industry, the academy offers five certificate programs: Operator Training, Health and Safety, Health and Safety en Español, Wall Thickness Control, and Rotomolding Crosslink. Since…
-
Ask Dr. Nick: Should You Switch from Powder to Pellets?
Is it a common strategy to use pellets instead of powder for rotomolding? Are there any advantages to using pellets over powder during processing? I want to move away from powder and its potential to become airborne. Dr. Nick: The main raw material used for rotomolding (polyethylene, PE) is originally produced in the form of…
-
2024 Hall of Fame Inductees: Martin Coles and Susan Gibson
The Association of Rotational Molders is thrilled to announce the election of Martin Coles and Susan Gibson to the Rotational Molding Hall of Fame. Their induction ceremony will take place on September 26 at the ARM Annual Meeting + Rotoplas. Martin Coles Martin joined the global rotomolding industry in the 1980s working for the Italian…
-
Rotoplas 2024 Exhibitor Lineup
Rotoplas, the premier global exposition for rotational molding, showcases cutting-edge technology, products, and services tailored for the industry. It unites manufacturers, suppliers, designers, engineers, and researchers worldwide for idea exchange on rotational molding advancements. Plan to join us September 24-26 in Rosemont, IL. Registration is now open. You’ll meet with the following exhibitors: Sign up…
