ARM Members Access 55 On-line Training Videos

For ten years, ARM has been building a library of webinars and training videos that are available to our members online.  We currently offer 55 titles. Members can access all of these titles immediately. Non-members can join here.

Online training includes:

  • Operator Training Program (25 Videos) presented by Nick Henwood, Dru Laws, and more Click for the detailed contents
  • Burner Maintenance presented by Adam Covington
  • Considerations When Light-Weighting Rotomolded Parts presented by Henry Hay
  • Cooling Fixtures presented by Ron Joannou Jr. and Joey Morsi
  • Determining Your True Cost presented by Steve Osborn
  • EPCRA Reporting & Combustible Dust (with Roto 101 Intro) presented by EPA & OSHA
  • Finishing Parts with Robots (Case Study) presented by Dru LawsFinite Element Analysis: The Basics presented by Michael Paloian
  • Improving Rotational Molded Insert Performance presented by Glenn Larkin and Jon Ratzlaff
  • In-Process Rotational Foam Molding presented by Dru Laws
  • Infrared Thermography presented by Bill Spenceley
  • Lengthening the Life of Your Mold presented by Tony Short
  • Making the Most of Your Marketing Budget presented by Melissa Shearer
  • Mold Clamping Methods – Pros and Cons presented by Erik Adams and Bob Mueller
  • Mold Release presented by Even Silo & Scott Waterman
  • Prop 65 for Rotomolders presented by Mike Haubert
  • Proper Sampling Techniques presented by Josh Hunsberger and Dave Loeffler
  • Rebranding Your Business (Case Study) presented by Tom Innis
  • Rotational Molding & the Evolving Structural Part Processing Business presented by Dr. Peter Mooney
  • Roto 101 presented by Rick Carlsen & Ron Joannou Jr.
  • Safety in Rotomolding & OSHA Compliance presented by Dave Schwoerer
  • Save Energy & Save Money presented by Bill Spenceley
  • Selecting the Right PE Grade for Your Part presented by Nick Henwood
  • Solve Cosmetic Part Problems presented by Jon Ratzlaff
  • Stiffness Models and Options for Multi-Layered Parts presented by Dr. Nick Henwood
  • Test Method for Flowability (Dry Flow Rate) of Polyethylene Powders Using a Specified Funnel presented by Ron Cooke & Jon Ratzlaff
  • Troubleshooting Your Rotomolding Operation from a Shop Floor Perspective presented by Ron Cooke
  • Turning a 4% Bottom Line into a 10% Bottom Line presented by Al Bates
  • Understanding the Molding Cycle presented by Gareth MacDowell
  • What Does Internal Air Mold Temperature Have to do with Quality presented by Gareth McDowell
  • What’s Your Problem (2 videos) presented by Ron Cooke & Sandy Scaccia

One response to “ARM Members Access 55 On-line Training Videos”

  1. What a great benefit to our members

Leave a Reply

%d bloggers like this: