May 25 Troubleshooting Call

Solve process issues and problems by joining our monthly troubleshooting call on May 25 at 2 PM Central. This call will be moderated by Ron Cooke (ExxonMobil Chemical Company) and Sandy Scaccia (Norstar).

These calls are an opportunity for molders to inquire about any challenges in their process and share solutions with one another. Recently we’ve discussed the best way to recondition or clean blades on high-intensity mixers, the best system for demolding (bolts vs. clamps), flow pattern problems depending or regrind, measuring the powder going into the mold, and causes for resin to “pink”?

Members should email staff to be added to the call.

Leave a Reply